AD8009 |
RFQ for AD8009 Required Field |
 |
| Technical/Catalog Information | AD8009AR |
| Vendor | Analog Devices Inc |
| Category | Integrated Circuits (ICs) |
| Packaging | Tube |
| Amplifier Type | Current Feedback |
| Number of Circuits | 1 - Single |
| Package / Case | 8-SOIC (3.9mm Width) |
| Slew Rate | 5500 V/s |
| Gain Bandwidth Product | - |
| Current - Supply | 16mA |
| Current - Output / Channel | 175mA |
| Voltage - Supply, Single/Dual (±) | 5 V ~ 12 V, ±2.5 V ~ 6 V |
| Output Type | - |
| -3db Bandwidth | 1GHz |
| Current - Input Bias | 50A |
| Operating Temperature | -40°C ~ 85°C |
| Voltage - Input Offset | 2000V |
| Drawing Number | * |
| RoHS Status | RoHS Non-Compliant |
| Other Names | AD8009AR AD8009AR |
| Product | Manufacturers | Pack | D/C |
| AD8009 | Analog Devices | - | - |
The AD8009 is an ultrahigh speed current feedback amplifier with a phenomenal 5,500 V/µs slew rate that results in a rise time of 545 ps, making it ideal as a pulse amplifier.
The high slew rate reduces the effect of slew rate limiting and results in the large signal bandwidth of 440 MHz required for high resolution video graphic systems. Signal quality is main- tained over a wide bandwidth with worst case distortion of 40 dBc @ 250 MHz (G = +10, 1 V p-p). For applications with multitone signals such as IF signal chains, the third order Intercept (3IP) of 12 dBm is achieved at the same frequency. This distortion performance coupled with the current feedback architecture make the AD8009 a flexible component for a gain stage amplifier in IF/RF signal chains.
Typical Application |
Features |
| Pulse AmplifierIF/RF Gain Stage/AmplifiersHigh Resolution Video GraphicsHigh Speed InstrumentationsCCD Imaging Amplifier | Ultrahigh Speed5,500 V/s Slew Rate, 4 V Step, G = +2545 ps Rise Time, 2 V Step, G = +2Large Signal Bandwidth440 MHz, G = +2320 MHz, G = +10Small Signal Bandwidth (3 dB)1 GHz, G = +1700 MHz, G = +2Settling Time 10 ns to 0.1%, 2 V Step, G = +2Low Distortion Over Wide BandwidthSFDR44 dBc @ 150 MHz, G = +2, VO = 2 V p-p41 dBc @ 150 MHz, G = +10, VO = 2 V p-p3rd Order Intercept (3IP)26 dBm @ 70 MHz, G = +1018 dBm @ 150 MHz, G = +10Good Video SpecificationsGain Flatness 0.1 dB to 75 MHz0.01% Differential Gain Error, RL = 150 0.01%Differential Phase Error, RL = 150 High Output Drive175 mA Output Load Drive10 dBm with 38 dBc SFDR @ 70 MHz, G = +10Supply Operation±5 V Voltage Supply14 mA (Typ) Supply Current |
